Are you trying to find a simple efficient gold recovery process?
Allow me to inform you concerning mineral processing equipment that is being used successfully all round the world, by large scale mining operations throughout to artisanal miners.
It’s a substitute for using cyanide.
Among the most simple and efficient technologies does not call for the use of dangerous chemicals.
Sure, using a cyanide solution for gold leaching is widespread.
BUT, as Wired magazine from the UK points out…
The waste product from cyanidation is a disgusting and poisonous gloop that can float into rivers or poison groundwater, killing wildlife and rendering landscape sterile. Enormous pits of ore can be subjected to cyanide leaching in mines, together with the runoff that a significant environmental hazard that requires a significant cost to render safe.
Rather than that, why don’t you utilize gravity?
Gravity separation of fine gold has been the functioning principle in many cost-effective mineral processing plants, all around the world.
That is in both small-scale and large scale mineral extraction operations.
For example, a small gold shaking table employs a low-capacity vibrating table for gold extraction.
Of course, it’s not just for extracting gold. Mineral extraction using a focusing table works for recovering other precious metals and minerals too, including all heavy minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.
The Wave Table is ideal for cleaning up sluice box separating and concentrates gold from black sands, too. The Wave Table is perfect for cleaning up centers from Knelson, Falcon, Knudsen, STLBs as well as other centrifugal concentrators. (For large throughputs and high capacity mining/processing operations, particularly for gold, we can help you with the most cost effective Centrifugal Concentrators.)
GRAVITY SEPARATION IS EFFICIENT
Larger mines are utilizing Wave Tables to perform closing gold clean-ups and the’finishing’ of gold concentrates. This procedure eliminates the need to use cyanide or mercury.
Gold wave tables are a lot better for your environment, in addition to for workplace security!
If you want to efficiently recover fine gold from gold bearing ore, then you need a Centrifugal Concentrator. For instance, a 1-3 TPH unit will handle both alluvial and hard rock substance.
In a large mineral processing plant, you might use a Centrifugal Concentrator (known in some states as an STLB) to execute the key concentration. That’s, to regain all the gold and heavy minerals from the ore feed.
But to actually get’clean gold’, you have to then run the drawbacks through another process (a secondary concentrator), such as running the drawbacks over a Wave Table. As a result, an upgraded fraction is regained that is a lot smaller in mass, so it’s a lot easier to take care of.
When concentrates are cleaned up on a Wave Table, you produce clean gold ready to be smelted and turned into a gold bar for sale.
This without having cyanide or mercury.
Another cyanide-free alternative is chemical leaching.
Gold can be extracted from run of mine ore in addition to from concentrates using the Chemical Leaching System, which can be a cost effective non-cyanide gold leaching system that GoldWaveTables.com can assist you with.
CLS may be used for almost any metallic but is especially used for the recovery of silver, gold and platinum group metals.
3 MODELS OF THE GOLD WAVE TABLE
This unbelievable gold split apparatus comes in 3 versions covering all scales of operation. Regardless of the title, a gold wave table works to extract ANY heavy nutrient, in which there is a particular gravity (density) differential between the valuable heavy mineral constituent as well as its own gangue or host substance. Additionally, it cleans grit and gold in the stripped carbon used in CIP/CIL applications.
THE ULTIMATE DEVICE
To quote Ian, a 30-year experienced in the mining and minerals sector,”I’ve personally had success with the Wave Table recovering very fine heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. As it’s so efficient at recovering very nice particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will readily recover 5 micron gold from tailings. In mineral processing, it is frequently what you lose to tailings that is as critical as what you recover. I’ve found that the Wave Table is the greatest device to check tailings for lost heavy minerals, including gold. A very simple test in your tailings will only require a few minutes. You will observe any heavy nutrient dropped in the tailings in a short time period. This type of test will obviate the need for lengthy fire assay turn around times.”
MICRON MILL WAVE TABLE
The most significant model is the M10 which does up to 8TPH (tonnes per hour) and the M8 model does around 1TPH. The smallest version, the M5, is suitable for smaller cleanups of 20 kgs per hour and may be utilised as a laboratory unit.
– Gold wave tables are a lot better for the environment
– Better for workplace safety too
– Efficient and cost-effective.
When you are looking for gold recovery plant for sale, check out GoldWaveTables.com
The Wave Table may be used in the smallest to the biggest gold mine. They may be used for full scale production purposes, or just as a cleanup or immersion apparatus in the gold room.
The Wave Table is now increasingly being used to recover gold from test samples of a couple of kgs in size and upward. This form of majority testing is quick and the quantitative outcomes imply that you’re not just relying on fire assays or AAS, particularly in visible free gold deposits, even when gold is ultra fine (5 to 20 microns).
Visit https://GoldWaveTables.com to learn more today.
We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.
Also learn more about Gold Shaking Table here.